Loading...
Address: Druzstevni 845, Uherske Hradiste, 686 05, CZECH REPUBLIC
ID number (IČO) : 26953501, TAX ID number (DIČ) : CZ26953501
MI-Europe s.r.o. is registered in the Commercial Register, Section C, Entry No. 46844, maintained by the Municipal Court, Brno
All rights reserved © 2024, this site is protected by reCAPTCHA
Loading...
The accurate measurement of electric energy in high-voltage, high current distribution systems relies on 3 key components: a watt-hour metre, a high-voltage transformer and a high current transformer to step down the high-voltage and high current to accurate low levels for input to the kWh metres or other electrical measuring devices. However, if the instrument transformers are not calibrated with similar accuracy, then the precise measurements made by the measuring devices will be with high uncertainty and misleading. For high-voltages and currents, this inaccuracy can have a significant impact on the result. Therefore, calibration of the instrument transformers has become increasingly important.
Measurements International (MI) has many years of experience in high-voltage and high current engineering. Beginning with single instruments such as automated high-voltage capacitance bridge, high-voltage dividers and wattmeter to high complex systems like power calibration system, Automated Load Loss Measurement System (ALMS) and isolating current transformer (ICT) system. MI is also 17025 accredited for both in-house and on-site calibration of these measurements. This capability authenticates not only our credentials as a industry-leading instrument developer but also as calibration service provider for instrument transformers.
The model 7070A series of AC Ratio Bridges developed at MI are fully automated for fast and accurate measurements of instrument transformer errors. The 7070A is easily integrated in complex system to achieve calibration of voltage transformers up to 800 kV and current transformers to 10,000 Amps. The 7070A will set new standards of measurement in the calibration of instrument transformers.
The 7070A multi-range design allows to cover a wide range of measurements ratio with minimum number of reference standard when calibrating current transformer.
Model 7070A-UI
The model 7070-UI is an AC Ratio Bridge that combines AC current and voltage ratio measurement capabilities. It provides the user with the convenience of one single measuring unit to calibrate VTs and CTs without losing accuracy. Its main application is for VT and CT test sets. However, the combination of voltage and current inputs can also be used to perform power measurements. The flexibility and high accuracy of this design can be a single instrument solution for multiple measurements at any AC lab. The block diagram for the 7070A-UI is shown in Figure 1.
http://mintl.com/wp-content/uploads/AC-Ratio-Bridge-Block-Diagram-300x155.jpg
Figure 1. Model 7070A-UI for 4 inputs
Measurement Systems
MI designs and supplies system solution for current and voltage transformer measurements customized for specific requirement. Some of the system components are listed below:
1. 7020 series of Standard Current Transformers
2. 7200 series of Current Comparators
3. 2500 series of Voltage Dividers
4. Model CG series of High-Voltage Capacitors
5. Electronic burdens
6. Computer and printer for external control and data recovery.